| |
Waterproofing & Damp-Proofing
Damp-Proofing
Del-Val Foundation Coating (Damp-Proofing)
Del-Val Foundation Coating is a blend of quality asphalts with petroleum distillates. This non-fibered coating provides excellent damp-proofing properties to any surface to which it is applied. Del-Val Foundation Coating requires no thinning or heating and dries, to a glossy, black, smooth, semi-elastic film. It can be used in a wide temperature range thereby allowing contractors to continue working even when weather is below freezing.
United Damp-Mastic Brush Grade (Damp-Proofing)
This product is manufactured to a brush or spray consistency using specialty asphalts, mineral fibers and top quality solvents. This formula is combined to provide a smooth even film over the surface being coated. United Damp-Mastic is made to damp-proof masonry surfaces below grade and has exceptional workability over a wide range of temperatures and conditions. This product can also be used with United Asphalt reinforcing fabric which gives the product more stability during thermal movements.
United Damp-Mastic Trowel Grade (Damp-Proofing)
A Solvent-Based blend of select refined asphalts mineral fibers, and waterproofing gums. The formulation of these materials in exact proportions creates heavily bodied trowel grade cement. Used in conjunction with United Damp –Mastic Brush Grade to secure a tight seal against moisture. When dry, it is very flexible and protects very well against certain natural chemicals found in soil.
United Fibered Emulsion (Damp-Proofing)
United Asphalt Fibered Emulsion is a blend of choice refined asphalts, emulsifiers and reinforcing fibers dispersed in water with the aid of colloidal clay. United Emulsion Coating is used as protective coating for a variety of applications on asphalt, metal, and masonry surfaces and as an adhesive for polystyrene insulation. ASTM-D-1227 Type II & III specifications
United Non-Fibered Emulsion (Damp-Proofing)
United Non-Fibred Emulsion Coating meets ASTM-D-1227 Type II & III specifications. This material is an asphalt emulsion with selected colloids to formulate a dampproofing coating. Used as protective coating for a variety of applications on asphalt, metal, and masonry surfaces and as an adhesive for polystyrene insulation.
Waterproofing
UA-200 Modified Emulsion Coating (Waterproofing)
UA-200 Modified Emulsion Coating is a latex modified asphalt emulsion and is 100% ASBESTOS-FREE. This material is an asphalt emulsion with colloids and polymers to formulate a waterproofing coating. UA-200 Modified Emulsion Coating is used as a protective coating for a variety of applications on asphalt, metal, and masonry surfaces, and foam surfaces.ICC AC-29, ASTM C-1306
UA-201 Polymer Modified Asphalt Coating (Waterproofing)
UA-201 Polymer Modified Asphalt Coating is formulated with asphalt and polymers to meet the ICC AC-29, ASTM C-1306 specification. This material is a polymer modified asphalt cutback for use as a waterproof coating. This material is impervious to water and remains pliable. UA-201 Polymer Modified Asphalt Coating is used as a cold applied polymer modified asphalt membrane coating below grade to waterproof where water may cause deterioration or damage. This material can be used for private and commercial applications on metal tanks, metal and concrete pipes, block and poured foundations, silos, etc
Waterproofing Membrane
Protection Course (Waterproofing)
PROTECTION COURSE from W. R. MEADOWS is a multi-ply semi-rigid core composed of a mineral-fortified asphalt core formed between two outside layers of asphalt-impregnated reinforced mats, manufactured in accordance with ASTM D 6506. When properly applied by personnel trained in good waterproofing techniques, PROTECTION COURSE will absorb the impact of aggregate shock and normal jobsite foot traffic. It also protects the membrane waterproofing from penetration by sharp aggregate during backfilling and later settlement.
Asphalt Woven Glass Fiber Fabric
An inorganic, woven glass fiber fabric, coated with hot asphalt coating. A plain weave fabric that has 20 threads per inch in the warp direction (length) and 20 single threads in the fill direction (crosswise). A lightweight, bi-directional fabric with high tensile strength that will not rot, tear or wear. Can be used with both hot and cold applied asphalt coatings, cements and adhesives. Excellent repair fabric for both new and old construction in roofing and waterproofing applications. Other applications include: foundations, slabs, tunnels, subways, pipeline joint wrap, parapet wall treatment, tennis courts, and plaza decks. A.S.T.M. D-1668-86 TYPE I* (American Society For Testing Materials) and FEDERAL PEC. HH-C-466
|
 |
